Download | Bitcoin Diamond


IdealCash deal coin is a Decentralized Digital Currency based on an Open-Source Peer-To-Peer Internet Protocol. It provides Proof-of-Stake (PoS) Block Generation Methods with separated target limits, granting everyone a 30% floating coin return rate! Also, transaction fee’s are extremely low, it’s only 0.0001 to transfer 10000000.00 coins!



Cryptocurrency Platform

A decentralized crypto platform where users automatically receive airdrops from our partners simply for holding our coins // $CSTL // [email protected]

I'm new to Bitcoin and I downloaded Bitcoin-Qt 0.8RC1. Can I assume that it's safe to use, or should I wait for the final release?

I'm worried about stealing, not about possible harmless bugs and crashes.
Also: the faucet is not working, any idea why and when it will be back?
Thanks for you advice :)
submitted by walrod to Bitcoin [link] [comments]

Does Armory and Bitcoin-QT download seperate (but the same) blockchain, or do they both work off of the same blockchain (so you only need to download it once with either of them, and then you can use both)?

I want to know if I can "uninstall" bitcoin-qt and the blockchain it downloaded if it is using a "different" one than Armory since I'm using Armory now.
submitted by THISTIMEISDIFFERENT to Bitcoin [link] [comments]

How do you check the pgp signature of Bitcoin QT or the other wallet clients after you download them?

I have a basic understanding of PGP and how it works, and have successfully verified signatures, but I would also like to hear an explanation of how it works and how to do it, and think it would be helpful to others as well.
submitted by elzonko to BitcoinBeginners [link] [comments]

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp:// --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./ ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example Then we need to make it runnable so:
sudo chmod +x 
Now to run it, it's just:
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

Forgot to upgrade your node? Here's how to get back onto the upgraded BCH network:

These instructions are for those who left old versions (0.20.12 or older) of Bitcoin ABC running through the May 15th, 2020 upgrade. Follow these instructions to get back on the main network.
If you are using bitcoin-qt, follow these steps:
  1. Stop your running node
  2. Delete the list of nodes you have banned: rm ~/.bitcoin/banlist.dat
  3. Download version 0.21.x from
  4. Start up the new version (./bin/bitcoin-qt)
  5. Open Help -> Debug window
  6. In the console type reconsiderblock 00000000000000000033dfef1fc2d6a5d5520b078c55193a9bf498c5b27530f7
  7. Wait until your node is on the correct chain. This could take some time if your old node was running for a while, and other nodes banned you on the network. You can check that you are on the correct chain by typing getblockchaininfo and verifying the information with a public block explorer such as,, or
If you are running bitcoind, follow these steps:
  1. Stop your running node
  2. Delete the list of nodes you have banned: rm ~/.bitcoin/banlist.dat
  3. Download version 0.21.x from
  4. Start up the new version (./bin/bitcoind)
  5. Use bitcoin-cli to type: ./bin/bitcoin-cli reconsiderblock 00000000000000000033dfef1fc2d6a5d5520b078c55193a9bf498c5b27530f7
  6. Wait until your node is on the correct chain. This could take some time if your old node was running for a while, and other nodes banned you on the network. You can check that you are on the correct chain by typing ./bin/bitcoin-cli getblockchaininfo and verifying the information with a public block explorer such as,, or
submitted by Mengerian to btc [link] [comments]

Reddcoin (RDD) Core Wallet Release - v3.10.0rc4 Core Staking (PoSV v2) Wallet including MacOS Catalina and more!
Reddcoin (RDD) Core Dev team releases v3.10.0rc4 Core Wallet.
Includes full MacOS Catalina support, Bitcoin 0.10 codebase features, security and other enhancements. Full changelog available on github, complete release notes to be published with full 3.10.0 release anticipated shortly.
NOTE: This v3.10.0rc4 code is pre-release, but may be used on mainnet for normal operations. This final "release candidate" version addresses an issue identified where the individual posv v2 stake transaction could be modified such that no funds went to the developer. - See Issue #155 for description. Also includes additional components of enhanced build system; Travis continuous integration (CI) and Transifex translations. Prerelease v3.10.0rc4 binary code is not certificate signed.
To assist in translations, correct text, or add languages, please join the following team: To assist in other aspects of the Reddcoin project, please contact TechAdept or any member of the team.
Bootstrap (zipped folder of blockchain, date of upload 5-1-20) may be downloaded here if required:
Commits included since rc3:
2a8c7e6 Preparations for 3.10.0 rc4 4a6f398 Update translations 7aa5151 build: update reference time to something more recent 1a65b8c Update translations d4a1ca6 transifex: update translation instructions a03895b transifex: update config for this release 51ad1e0 move check before supermajority reached 794680f Make check for developer address when receiving block 457503e travis: Remove group: legacy 97d3a2a travis: Remove depreciated sudo flag 21dcfa6 docs: update release notes 7631aac update error messages 5b41e31 check that the outputs of the stake are correct. 9bd1820 travis: test with wallet enabled 55f2dd5 fix reference to Reddcoin 220f404 travis: disable libs for windows builds (temp) b044e0f depends: qt update download source path 2fe2d85 depends: set new download source 4cf531e remove duplicated entry 0d8d0da travis: diable tests e13ad81 travis: manually disable sse2 support for ARM processors 1f62045 travis: fix crash due to missing (and not required) package 0fb3b75 travis: update path 9d6a642 docs: update travis build status badge with correct path
submitted by TechAdept to reddCoin [link] [comments]

Mousecoin Network May 2020 Report

Mousecoin Network May 2020 Report


The last month in the world of Mousecoin has been HUGE! There have been many changes, the addition of new awesome ways to earn MIC3 including our Faucets page and the Phoneum Games. We have also seen the launch of our Community Membership, which entitles each registered user to receive up to 200,000 MIC3 per month. We hope you are all keeping safe and are happy to provide you with our Mousecoin Network May 2020 Report.
FINALLY, after months of negotiation and with the help of Phoneum, Mousecoin has partnered with Phoneum to be included in two of the most popular Phoneum crypto games currently available. We have added a new Games page, whiche features all the information and link for the games, with more to come. Here is the run down:

Crypto Treasures

📷 📷

Crypto Treasures is a game, where players complete various quests, trivia and mini games to unlock Gold (in-game currency), Treasure Chests, Items, Collectibles, and various Crypto currencies, including the featured Mousecoin (MIC3).

Crypto Planet

📷 📷

Visit a new type of planet, one that allows you to earn real cryptocurrencies while playing a beautiful and futuristic game. The main objective is to extract the valuable resources of the planet: Crystals. There is a special machine designed specifically to dig up the Crystals automatically and deliver them to you. All you have to do is activate the Digger and after 4 hours, it will have the resources ready to be claimed.

Earn up to 200,000 MIC3 Per Month!

At the beginning of last month we began establishing our Community Membership which offers all registered Mousecoin Members a share of the rewards earned from the Community Fund just for being a member and following Mousecoin on all of our social media. As we come to the end of the first month we are currently in the process of checking all registrations and working out payments. We have also updated the profile page to include a Member News tab, Verified Notifications for each Social Media and a Monthly Payment History section. We are currently working on verifying all accounts registered before 1/6/2020, and should have all of these processed in the next few days, with all payment going out before the end of the week.

Become a part of the Mousecoin (MIC3) Community.Membership is FREE and it comes with HUGE bonuses!!

Our Community is important to us, it is the backbone of the Mousecoin Network. Every follow, like, interaction, comment and re-post of our content members of the Mousecoin Community do all helps us to grow awareness of Mousecoin, growing and strengthening our community. To show our appreciation for your loyalty we are rewarding every Mousecoin Member with a regular monthly payment of up to 200,000 MIC3 just for joining and remaining a member of our social media(s). To become a member all you need to do is complete the registration form below, making sure to become and stay a member on our social media(s) and start EARNING!!! Each of our social media accounts (listed below) that you follow entitles you to a portion of the potential 200,000 MIC3 you can earn each month. If you only follow on Twitter, you will only get 25,000 MIC3 per month, follow on 2 socials and get 50,000 MIC3, etc.
TELEGRAM Become and stay a member of:
Get 25,000 MIC3 PeMonth
TELEGRAM ANNOUNCEMENTS Become and stay a member of:
Get 25,000 MIC3 PeMonth
DISCORD Become and stay a member of:
Get 25,000 MIC3 PeMonth
TWITTER Become and stay a member of:
Get 25,000 MIC3 PeMonth
FACEBOOK Like and Follow:
Get 25,000 MIC3 PeMonth
REDDIT Become and stay a member of:
Get 25,000 MIC3 PeMonth
MEDIUM Become and stay a member of:
Get 25,000 MIC3 PeMonth
INSTAGRAM Become and stay a member of:
Get 25,000 MIC3 PeMonth
PLEASE NOTE: You must register before the 1st of each month in order to qualify for the previous months payment. All payments will be processed in the first week of the following month, once the accounts have been verified. You can check the process of you social account verification’s, as well as your monthly payment status on your account page. You must remain a member of the social media to receive the reward.
For anyone that isn’t already a member, you can find all of the information on our Community Member Registration Page
Just a reminder for the community and also for any new members, we have added a Wallet Setup Guides page, which takes any first time user of Mousecoin step-by-step through the process of installing their Mousecoin wallet and getting it online. The guide uses the latest blockchain snapshot found on the Wallet Downloads Page in the example explanation meaning that all new members of the Mousecoin community will be able to get their wallets online faster as the sync time should be minimal. We will be updating the blockchain snapshot at least once every month to ensure that people have access to the most up to date blockchain info. The latest blockchain snapshot was performed on the 1st June 2020.
The wallet version is currenty V1.0.0.0, with future releases of the Mousecoin wallet coming soon
If you are new to crypto currency or just after a bit of guidance setting up the Mousecoin wallet, check out our Wallet Setup Guides
📷 Windows
📷 Raspberry Pi
📷Wallet & Blockchain Snapshot Download (UPDATED 01-06-2020)
In the last month we asked the community if they would be interested in being a part of a Community Staking Pool. After investigations into this finding security flaws in most platforms, as well as the lack of interest from members of the community we have decided to not go ahead with the Community Staking Pool. While we understand that there are members of the Mousecoin Community that are unable to stake themselves for whatever reason, and that there are a number of staking platforms that offer pool staking for MIC3 to help these people stake, we will not officially be supporting any staking platforms. We ask all Community members using these or thinking about using these to keep in mind that any MIC3 hosted on these platforms is not in their wallets, and therefore not controlled by them. Do proper investigations into any platform that you use for this as there is always the possibility of loss. We encourage all members of the Mousecoin Community to stake from their own wallet (where possible) as this helps us to secure the network. If you need help setting up your wallet, go to our Wallet Setup Guides page for step-by-step guides on setting up your Mousecoin wallet.
We have updated the Mousecoin (MIC3) Faucets Page:
To make things clearer and we will be adding more faucets soon!
Last month we saw the edition of the USDT/MIC3 pair to nanu exchange. In our efforts to increase exposure of Mousecoin, we are still attempting to list on both ATAIX and Unnamed.Exhchange.
ATAIX We have risen to 18th position in the voting list on ATAIX, but we still need your votes. Remember you can vote every 24 hours for this listing, and you can share in 125,000,000 MIC3
Unnamed.Exhchange The exchange listing for Unnamed.Exhchange is 0.05 BTC. For anyone unfamiliar with the exchange there are two ways that you can donate to the listing:
1. If you are already a member of, or wish to be a member of Unnamed.Exhchange (and why wouldn’t you), you can put funds towards our listing by tipping us through the trollbox (Mousecoins). If you wish to be a member of Unnamed.Exhchange, you can register here:
2. You can also donate to the listing fee through the following addresses: BTC – bc1qmaqzhfqcw0urva0rtgfz5qvq4rw7kdnp6j7754 LTC – ltc1qc775eeftdde2jrevnyukrd2w9853jy5gmtv6rn DOGE – DEnBpriaFnKiNeBv6Q7MVxMg5hLv5urQFg UTIP – AUTyu2JhGAaCkM3KAmeBopto2bNBchNJfE
If you would like to donate in another crypto available on Unnamed.Exhchange, we have opened up the chat on the Discord channel HERE to assist with this. Please request the address and we will provide it for you. ANY AND ALL DONATIONS ARE WELCOME!! This is a good exchange and getting a listing her should help lift the profile of MIC3.
We will be reporting balances to the discord channel
In the last month the Community Fund has undergone a huge amount of change. We have completely moved all of our remaining balances away from 4Stake, with the MIC3 going to the Community Fund MIC3 account and the remaining crypto’s towards out listing on Unnamed.Exhchange. The Community Fund page on the website has also been updated to reflect all of the changes. It is an exciting time for the Community Fund as we have now reached a balance that will sustain itself. This is why we have introduced the Community Member payment, and are able to sustain the faucets we have on and in the Phoneum Games. There is still more to come!


📷 📷📷 📷📷📷📷
📷 📷📷


📷📷📷📷📷📷📷 📷 📷📷


GENERAL: Wallets Explorer Github About Staking
NEWS/UPDATES: BitcoinTalk Discord Telegram Mousecoin Official News Twitter Medium
COMMUNITY FUND: Telegram Facebook
SUPPORT: Discord Mousecoin English\_ENG
FACEBOOK: Mousecoin English Mousecoin Portuguese
TELEGRAM: Mousecoin English\_ENG Mousecoin Portuguese Mousecoin Russian Mousecoin Korean Mousecoin Spanish Mousecoin Australia\_Australia


submitted by Micmouse to u/Micmouse [link] [comments]

Peercoin v0.9 (Codename Strider) Released - Includes Update to PoS Reward Economics - Hard Fork is June 8th, 2020 - Upgrade Today!

Peercoin v0.9 (Codename Strider) Released - Includes Update to PoS Reward Economics - Hard Fork is June 8th, 2020 - Upgrade Today!
NOTE: If you are new to Peercoin, check out the Peercoin Primer, a short 5 part video series covering the basic fundamentals of Peercoin.

Peercoin v0.9 Released!

We are pleased to announce that after many hard months of work, Peercoin v0.9 (Codename Strider) is complete and a hard fork is planned for Monday, June 8th, 2020 at 12:00:00 UTC. You must upgrade your wallet client before then!


Peercoin release v0.9.0
  • RFC-0019: PoW Block Spacing
  • RFC-0018: PoS Rewards Adjustment
  • RFC-0017: Limit Effective Coinage to One Year
  • RFC-0015: Reduce Time Drift
  • allow staking=0 command to disable minting
  • ability to filter out mint transactions in the QT wallet


While Peercoin v0.8 (Mantis) was largely about modernizing the codebase and improving the technical capabilities of the reference node software, the v0.9 (Strider) development cycle was about the economics of the Peercoin cryptocurrrency.
Both the PoW and PoS aspects of the network have been modified. Proof-of-Work changes are rather minimal; in summary target block spacing has been set to 60 minutes, rather than having dynamic PoW block spacing target. Block spacing is currently approximately 60 minutes anyway, so this may not sound like a big change, but it stops some PoW pools from trying to game the system. By making PoW more predictable, RFC-0019 brings inflationary stability to the overall system.
That change is minor when compared to the modification of the Proof-of-Stake side of the system. Some of you may have been following the discussion on RFC-0011, which was ongoing for over a year, and you may have noticed that RFC-0011 was rejected about two weeks ago and replaced with RFC-0018.
In my personal opinion, RFC-0011 is a great idea, probably the best idea thrown around here in the last couple of years, but ultimately it's too complex and we could not get consensus about it. The gist of both RFC-0011 and RFC-0018 is that the Peercoin money supply inflates at a rate of 1% on paper, but we are nowhere near that in practice.
In the old system, in order to have PoS inflation at 1%, a full 100% of all peercoins would have to start minting and solving blocks. This is simply impossible. In reality, over the last couple years Peercoin's PoS inflation has only been between 0.10% and 0.20%, which is far from the "promised" annual 1%. Due to the very rough history of this beautiful blockchain, namely the closure of btc-e, dozens of exchange hacks and closures, as well as a couple of de-listings, we are in a situation today where nearly half of the monetary supply has not been moved for over two years and we can consider those coins lost for all intents and purposes.
The basic principle of RFC-0011 was the following: the Peercoin network promises a steady inflation of 1% on monetary supply, and if you want a cut of it: mint. In essence, if only 20% of all peercoins are minting, the effective reward for active minters would be closer to 5% per year. However, the problem with this scheme is that minters would try to game the system and only mint when minting participation is low. Thus, we came up with RFC-0018, which yields similar results, but keeps the reward calculation simple and prevents gaming of the algorithm. You can read more about the change here.
Long story short, the network will reward active minters more, while keeping the overall inflation around 1%.
Accompanied with an expected inflation drop from increasing PoW hashrate, overall monetary inflation will largely remain unchanged, and will be more stable.
Other changes are minor and do not change the behavior of the network. RFC-0017 is just a consequence of RFC-11, and it stops minters from going offline for longer than a year and coming back to mint. We did not see this as fair, so the coinage counter is reset after a year now. Limiting coinage disincentivizes extremely long term periodic minting, thereby making continuous minting more attractive.
-- Peerchemist, Peercoin Project Lead

Upgrade Instructions

Before installation, make sure to backup your wallet from the main menu.
The v0.9 client can be downloaded from the wallets page of For users upgrading from v0.8, upgrade instructions can also be found on that page.
For the minority of users that may have skipped v0.8 and are upgrading from v0.7 or earlier, please check these additional instructions from the previous v0.8 release thread as you will need to go through the additional process of rebuilding your block database. If you need help with installation, leave a comment below.


To stay informed as we get closer to the hard fork date, you can follow the latest Peercoin news on our forums, our Twitter, or Reddit.
Other places to follow us:
Facebook LinkedIn BitcoinTalk Youtube Medium
Don't forget you can see the latest updates using the Blockfolio and Delta Apps!
Download Link:
Final reminder: The upgrade deadline is planned for June 8th, 2020 at 12:00:00 UTC
submitted by Sentinelrv to CryptoCurrency [link] [comments]

QONNECT x QAPITAL | Livesets Download

QONNECT x QAPITAL | Livesets Download Single sets can be downloaded via a torrent client. All my rips always are the highest available quality. The source of the rip for QONNECT x QAPITAL is a direct copy of No YouTube rips or screenrecordings.
Here is a link to the spreadsheet with the magnet / torrent link:
I am not gonna explain how to download with torrents, since I expect this is common knowledge. If you use BitTorrent or μTorrent, shame on you. Get a good torrent client like qBittorrent or Deluge, they dont include advertisements and work as well, if not better.
Note: If you have issues with the download not strarting, you can add my seedbox as a peer manually:
submitted by DyonR to hardstyle [link] [comments]

How I synced on a 2013 ultrabook in a few days

Note: I don't know exactly how long it took because I didn't do it in one go. I guess it was like 4,5 days doing it only at night. At some points(2015Q3, 2018Q2) it slows down and ETA goes up to 16 weeks or something.
The main bottleneck is IO. My 2013 mobile i3 has enough processing power to sync, I only used 3 threads and most of the time only one was close to 100%. The two directories that need to be written and read from intensively are chainstate and blocks/index. I pruned to 2GB and chainstate didn't go much over 3GB during the entire process. blocks/index is like 100MB.
The best solution is to move chainstate and blocks/index to a ramdisk. If you don't have enough ram the linux kernel has a thing called zram. Zram creates a compressed swap(cache) file in ram, this effectively increases your ram size at the cost of a bit of processing power and access speed(of the compressed part). On my machine I can net a bit more than 1GB of extra ram. That's right, with linux you can download more ram! The second best solution is to leave chainstate and block/index on a sdd. From what I've tested it should take up between 5 whole days and 2 weeks.
With regards to config, I didn't see much benefit in increasing the db cache over the default 450MB in bitcoin-qt. If I recall correctly, smaller prune sizes make chainstate larger.
After the initial sync keeping up to date is very easy on resources. You can catch up a week in a few minutes. At the moment bitcoind is using 400MB but I'm still working on bringing that number down.
Remember: If you want safety or if you want to help the network you need o run a full node. A full node is a node that verifies all transactions. A pruned node is a full node.
Edit: bitocoind really likes to hover around 400MB, sometimes it gets higher than that, some times it get's lower. A lot of that is data, not code, so if you start running out of ram your OS should drop those pages and get down to 250~300MiB. If you really want the memory to be this low all the time, on linux, you can either: Use cgroups to set the swappiness of the process to 99 so all data gets swapped but not code does; Use systemd and set MemoryLimit=300MiB(for example) so almost all data gets swapped but no code. I don't think any of those options are worth the small setup hassle.
submitted by nothing_works4me to Bitcoin [link] [comments]

Reddcoin (RDD) 02/20 Progress Report - Core Wallet v3.1 Evolution & PoSV v2 - Commits & More Commits to v3.1! (Bitcoin Core 0.10, MacOS Catalina, QT Enhanced Speed and Security and more!)

Reddcoin (RDD) Core Dev Team Informal Progress Report, Feb 2020 - As any blockchain or software expert will confirm, the hardest part of making successful progress in blockchain and crypto is invisible to most users. As developers, the Reddcoin Core team relies on internal experts like John Nash, contributors offering their own code improvements to our repos (which we would love to see more of!) and especially upstream commits from experts working on open source projects like Bitcoin itself. We'd like tothank each and everyone who's hard work has contributed to this progress.
As part of Reddcoin's evolution, and in order to include required security fixes, speed improvements that are long overdue, the team has up to this point incorporated the following code commits since our last v3.0.1 public release. In attempting to solve the relatively minor font display issue with MacOS Catalina, we uncovered a complicated interweaving of updates between Reddcoin Core, QT software, MacOS SDK, Bitcoin Core and related libraries and dependencies that mandated we take a holistic approach to both solve the Catalina display problem, but in doing so, prepare a more streamlined overall build and test system, allowing the team to roll out more frequent and more secure updates in the future. And also to include some badly needed fixes in the current version of Core, which we have tentatively labeled Reddcoin Core Wallet v3.1.
Note: As indicated below, v3.1 is NOT YET AVAILABLE FOR DOWNLOAD BY PUBLIC. We wil advise when it is.
The new v3.1 version should be ready for internal QA and build testing by the end of this week, with luck, and will be turned over to the public shortly thereafter once testing has proven no unexpected issues have been introduced. We know the delay has been a bit extended for our ReddHead MacOS Catalina stakers, and we hope to have them all aboard soon. We have moved with all possible speed while attempting to incorproate all the required work, testing, and ensuring security and safety for our ReddHeads.
Which leads us to: PoSV v2 activation and the supermajority on Mainnet at the time of this writing has reached 5625/9000 blocks or 62.5%. We have progressed quite well and without any reported user issues since release, but we need all of the community to participate! This activation, much like the funding mechanisms currently being debated by BCH and others, and employed by DASH, will mean not only a catalyst for Reddcoin but ensure it's future by providing funding for the dev team. As a personal plea from the team, please help us support the PoSV v2 activation by staking your RDD, no matter how large or small your amount of stake.
Every block and every RDD counts, and if you don't know how, we'll teach you! Live chat is fun as well as providing tech support you can trust from devs and community ReddHead members. Join us today in staking and online and collect some RDD "rain" from users and devs alike!
If you're holding Reddcoin and not staking, or you haven't upgraded your v2.x wallet to v3.0.1 (current release), we need you to help achieve consensus and activate PoSV v2! For details, see the pinned message here or our website or medium channel. Upgrade is simple and takes moments; if you're nervous or unsure, we're here to help live in Telegram or Discord, as well as other chat programs. See our website for links.
Look for more updates shortly as our long-anticipated Reddcoin Payment Gateway and Merchant Services API come online with point-of-sale support, as we announce the cross-crypto-project Aussie firefighter fundraiser program, as well as a comprehensive update to our development roadmap and more.
Work has restarted on ReddID and multiple initiatives are underway to begin educating and sharing information about ReddID, what it is, and how to use it, as we approach a releasable ReddID product. We enthusiastically encourage anyone interested in working to bring these efforts to life, whether writers, UX/UI experts, big data analysts, graphic artists, coders, front-end, back-end, AI, DevOps, the Reddcoin Core dev team is growing, and there's more opportunity and work than ever!
Bring your talents to a community and dev team that truly appreciates it, and share the Reddcoin Love!
And now, lots of commits. As v3.1 is not yet quite ready for public release, these commits have not been pushed publicly, but in the interests of sharing progress transparently, and including our ReddHead community in the process, see below for mind-numbing technical detail of work accomplished.
e5c143404 - - 2014-08-07 - Ross Nicoll - Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope. *99a7dba2e - - 2014-08-15 - Cory Fields - tests: fix test-runner for osx. Closes ##4708 *8c667f1be - - 2014-08-15 - Cory Fields - build: add to the list of meta-depends *bcc1b2b2f - - 2014-08-15 - Cory Fields - depends: fix shasum on osx < 10.9 *54dac77d1 - - 2014-08-18 - Cory Fields - build: add option for reducing exports (v2) *6fb9611c0 - - 2014-08-16 - randy-waterhouse - build : fix CPPFLAGS for libbitcoin_cli *9958cc923 - - 2014-08-16 - randy-waterhouse - build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix. *342aa98ea - - 2014-08-07 - Cory Fields - build: fix automake warnings about the use of INCLUDES *46db8ad51 - - 2020-02-18 - John Nash - build: add build.h to the correct target *a24de1e4c - - 2014-11-26 - Pavel Janík - Use complete path to include bitcoin-config.h. *fd8f506e5 - - 2014-08-04 - Wladimir J. van der Laan - qt: Demote ReportInvalidCertificate message to qDebug *f12aaf3b1 - - 2020-02-17 - John Nash - build: QT5 compiled with fPIC require fPIC to be enabled, fPIE is not enough *7a991b37e - - 2014-08-12 - Wladimir J. van der Laan - build: check for sys/prctl.h in the proper way *2cfa63a48 - - 2014-08-11 - Wladimir J. van der Laan - build: Add mention of --disable-wallet to bdb48 error messages *9aa580f04 - - 2014-07-23 - Cory Fields - depends: add shared dependency builder *8853d4645 - - 2014-08-08 - Philip Kaufmann - [Qt] move SubstituteFonts() above ToolTipToRichTextFilter *0c98e21db - - 2014-08-02 - Ross Nicoll - URLs containing a / after the address no longer cause parsing errors. *7baa77731 - - 2014-08-07 - ntrgn - Fixes ignored qt 4.8 codecs path on windows when configuring with --with-qt-libdir *2a3df4617 - - 2014-08-06 - Cory Fields - qt: fix unicode character display on osx when building with 10.7 sdk *71a36303d - - 2014-08-04 - Cory Fields - build: fix race in 'make deploy' for windows *077295498 - - 2014-08-04 - Cory Fields - build: Fix 'make deploy' when binaries haven't been built yet *ffdcc4d7d - - 2014-08-04 - Cory Fields - build: hook up qt translations for static osx packaging *25a7e9c90 - - 2014-08-04 - Cory Fields - build: add --with-qt-translationdir to configure for use with static qt *11cfcef37 - - 2014-08-04 - Cory Fields - build: teach macdeploy the -translations-dir argument, for use with static qt *4c4ae35b1 - - 2014-07-23 - Cory Fields - build: Find the proper xcb/pcre dependencies *942e77dd2 - - 2014-08-06 - Cory Fields - build: silence mingw fpic warning spew *e73e2b834 - - 2014-06-27 - Huang Le - Use async name resolving to improve net thread responsiveness *c88e76e8e - - 2014-07-23 - Cory Fields - build: don't let libtool insert rpath into binaries *18e14e11c - - 2014-08-05 - ntrgn - build: Fix windows configure when using --with-qt-libdir *bb92d65c4 - - 2014-07-31 - Cory Fields - test: don't let the port number exceed the legal range *62b95290a - - 2014-06-18 - Cory Fields - test: redirect comparison tool output to stdout *cefe447e9 - - 2014-07-22 - Cory Fields - gitian: remove unneeded option after last commit *9347402ca - - 2014-07-21 - Cory Fields - build: fix broken boost chrono check on some platforms *c9ed039cf - - 2014-06-03 - Cory Fields - build: fix whitespace in pkg-config variable *3bcc5ad37 - - 2014-06-03 - Cory Fields - build: allow linux and osx to build against static qt5 *01a44ba90 - - 2014-07-17 - Cory Fields - build: silence false errors during make clean *d1fbf7ba2 - - 2014-07-08 - Cory Fields - build: fix win32 static linking after libtool merge *005ae2fa4 - - 2014-07-08 - Cory Fields - build: re-add AM_LDFLAGS where it's overridden *37043076d - - 2014-07-02 - Wladimir J. van der Laan - Fix the Qt5 build after d95ba75 *f3b4bbf40 - - 2014-07-01 - Wladimir J. van der Laan - qt: Change serious messages from qDebug to qWarning *f4706f753 - - 2014-07-01 - Wladimir J. van der Laan - qt: Log messages with type>QtDebugMsg as non-debug *98e85fa1f - - 2014-06-06 - Pieter Wuille - libsecp256k1 integration *5f1f2e226 - - 2020-02-17 - John Nash - Merge branch 'switch_verification_code' into Build *1f30416c9 - - 2014-02-07 - Pieter Wuille - Also switch the (unused) verification code to low-s instead of even-s. *1c093d55e - - 2014-06-06 - Cory Fields - secp256k1: Add build-side changes for libsecp256k1 *7f3114484 - - 2014-06-06 - Cory Fields - secp256k1: add libtool as a dependency *2531f9299 - - 2020-02-17 - John Nash - Move network-time related functions to timedata.cpp/h *d003e4c57 - - 2020-02-16 - John Nash - build: fix build weirdness after 54372482. *7035f5034 - - 2020-02-16 - John Nash - Add ::OUTPUT_SIZE *2a864c4d8 - - 2014-06-09 - Cory Fields - crypto: create a separate lib for crypto functions *03a4e4c70 - - 2014-06-09 - Cory Fields - crypto: explicitly check for byte read/write functions *a78462a2a - - 2014-06-09 - Cory Fields - build: move bitcoin-config.h to its own directory *a885721c4 - - 2014-05-31 - Pieter Wuille - Extend and move all crypto tests to crypto_tests.cpp *5f308f528 - - 2014-05-03 - Pieter Wuille - Move {Read,Write}{LE,BE}{32,64} to common.h and use builtins if possible *0161cc426 - - 2014-05-01 - Pieter Wuille - Add built-in RIPEMD-160 implementation *deefc27c0 - - 2014-04-28 - Pieter Wuille - Move crypto implementations to src/crypto/ *d6a12182b - - 2014-04-28 - Pieter Wuille - Add built-in SHA-1 implementation. *c3c4f9f2e - - 2014-04-27 - Pieter Wuille - Switch miner.cpp to use sha2 instead of OpenSSL. *b6ed6def9 - - 2014-04-28 - Pieter Wuille - Remove getwork() RPC call *0a09c1c60 - - 2014-04-26 - Pieter Wuille - Switch script.cpp and hash.cpp to use sha2.cpp instead of OpenSSL. *8ed091692 - - 2014-04-20 - Pieter Wuille - Add a built-in SHA256/SHA512 implementation. *0c4c99b3f - - 2014-06-21 - Philip Kaufmann - small cleanup in src/compat .h and .cpp *ab1369745 - - 2014-06-13 - Cory Fields - sanity: hook up sanity checks *f598c67e0 - - 2014-06-13 - Cory Fields - sanity: add libc/stdlib sanity checks *b241b3e13 - - 2014-06-13 - Cory Fields - sanity: autoconf check for sys/select.h *cad980a4f - - 2019-07-03 - John Nash - build: Add a top-level forwarding target for src/ objects *f4533ee1c - - 2019-07-03 - John Nash - build: qt: split locale resources. Fixes non-deterministic distcheck *4a0e46e76 - - 2019-06-29 - John Nash - build: fix version dependency *2f61699d9 - - 2019-06-29 - John Nash - build: quit abusing AMCPPFLAGS *99b60ba49 - - 2019-06-29 - John Nash - build: avoid the use of top and abs_ dir paths *c8f673d5d - - 2019-06-29 - John Nash - build: Tidy up file generation output *5318bce57 - - 2019-06-29 - John Nash - build: nuke Makefile.include from orbit *672a25349 - - 2019-06-29 - John Nash - build: add stub makefiles for easier subdir builds *562b7c5a6 - - 2020-02-08 - John Nash - build: delete old's *066120079 - - 2020-02-08 - John Nash - build: Switch to non-recursive make
Whew! No wonder it's taken the dev team a while! :)
TL;DR: Trying to fix MacOS Catalina font display led to requiring all kinds of work to migrate and evolve the Reddcoin Core software with Apple, Bitcoin and QT components. Lots of work done, v3.1 public release soon. Also other exciting things and ReddID back under active dev effort.
submitted by TechAdept to reddCoin [link] [comments]

#Reddcoin ($RDD) Core Wallet Release 3.0.1 - PosV v2 SuperMajority Consensus Upgrade at 45.6% - Required Upgrade

Reddcoin (RDD) Core Wallet v3.0.1 - January 09, 2020
Version 3.0.1 is the official release version of Reddcoin Core. It is available for download at Reddcoin Core's Github repository here:
This release features PoSV v2.supermajority activation and new staking ruleset (and minor misc fixes). v3.0.1 is still not yet MacOS Catalina compatible. We are still working and should have that fix issued very soon. Sincere apologies to our Mac-using ReddHeads.
It is particularly important that all users upgrade, as once PoSV v2 is enforced, version 4 blocks will be rejected from the network entirely.
Therefore v3.0.1 is a "strongly recommended" update for all users. Note: If you have already installed v3.0.0, this upgrade is not required. If you have not yet upgraded from v2.0.x or earlier, this is a REQUIRED upgrade. Please install the newest version v3.0.1 to avoid losing functionality during supermajority activation of PoSV v2.
Reddcoin Core version 3.0.1 is now available from: Release Notes are available here and replicated below in this announcement:
This is a new major version release of Reddcoin.
Previously, the original and subsequent versions of Reddcoin were taken from a fork of the Litecoin code base.
With the release of Reddcoin V2.0.0, the code was based directly from a fork of Bitcoin. This allows for better source control and feature implementation from upstream changes into the future
With the release of Reddcoin V3.0.0, the PoSV stake reward has been improved to allow for a target 5% network growth, in process re-incentivizing individual network stakers and providing for integrated dev support.
Upgrading to this release is strongly recommended and required for continued operation. Once a supermajority of 90% is reached, old wallets will no longer accept the new v5 blocks.
Please report bugs using the issue tracker at github:
How to Upgrade
If you are running an older version of Reddcoin, shut it down. Wait until it has completely shut down (which may take a few minutes for older versions). Run the installer (on Windows) or just copy over /Applications/Reddcoin-Qt (on Mac) or reddcoind/reddcoin-qt (on Linux).
Start wallet. All done!
Reddcoin v3.0.0 introduced an updated PoSV method to better distribute staking rewards and target a overall 5% network growth. Staking and relay policy enhancements 
To implement PoSV v2, Reddcoin Core's block templates are now for version 5 blocks only. When PoSV v2 consensus (Supermajority 9000/10000) is reached, only v5 blocks will be accepted by the network.This equates to approximately 90% of blocks being generated over 1 week period. Status at any time may be viewed in node debug.log
Blockchain Download:
Blockchain data for both testnet and mainnet along with instructions can be downloaded from github.
3.0.1 changelog
*83e212838 - John Nash, 2020-01-09 : really delete these files *3a1458ecd - Oliver Webb, 2020-01-08 : Added missing dependency libminiupnpc-dev for Jessie *d21915431 - Tiago Peralta, 2019-06-21 : Add vout to listtransactions/gettransaction *8d58ea7cf - Oliver Webb, 2020-01-08 : Script for downloading pre compiled binaries for Raspbian Jessie, Stretch or Buster *d4eced1bc - Oliver Webb, 2020-01-08 : Delete *c5e9f91cf - Oliver Webb, 2020-01-08 : Delete *5d5771b00 - Oliver Webb, 2020-01-08 : Delete *75c6ae91b - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *54c501787 - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *acb30a2b6 - Oliver Webb, 2020-01-05 : script files for Raspbian Jessie (also Stakebox) *cfddbe594 - John Nash, 2020-01-05 : Update copyright year and version *e46e5e7de - John Nash, 2020-01-05 : download script for pre compiled wallet *37386790a - John Nash, 2020-01-05 : change libssl deb packages links to github *9dbc772e6 - Oliver Webb, 2020-01-03 : download script for pre compiled wallet *857d697fd - Oliver Webb, 2020-01-03 : change libssl deb packages links to github *2cb74b9a8 - John Nash, 2019-12-31 : update copyright year *c641a1ab3 - Oliver Webb, 2019-12-30 : Raspberry Pi build script files for v3 wallet *a3f21a4a4 - John Nash, 2019-12-30 : add install script for building db4 update instructions for unix, osx, arm building using the db4 install script *5f6299b2a - John Nash, 2019-12-28 : docs: Update build notes for arm processors *465716c01 - John Nash, 2019-12-28 : test for arm devices *3fec3a535 - John Nash, 2018-02-02 : build: update source paths *5f6031ab4 - John Nash, 2019-12-28 : Scrypt n=1024 Pow hash based upon Colin Percival's Tarnsnap (2009) Modified by Artforz, coblee, pooler, wtogami, Nikolay Belikov, reddink *2fd4d91a0 - John Nash, 2019-12-24 : update copyright year *326828b36 - John Nash, 2019-12-24 : set release state true *8ebede0a6 - John Nash, 2019-12-24 : release notes *36df6fdfb - John Nash, 2019-12-23 : add check explictly for v5 blocks or greater *874dc1f0c - John Nash, 2019-12-17 : remove hardcoded global variable rearrange debug log output *763b25db8 - John Nash, 2019-12-17 : move copyright to new line *536baf635 - John Nash, 2019-12-17 : update version and set release state to false *cde9009f3 - John Nash, 2019-12-17 : update copyright year *ae41b7ed3 - John Nash, 2019-12-17 : set isSuperMajority to 90% for mainnet *e43e1c8ed - John Nash, 2019-12-10 : additional logging to verify isSuperMajority in the debug.log output *e31783cac - John Nash, 2019-12-05 : add/update public key for mainnet *405c6f002 - John Nash, 2019-12-05 : add log output for current inflation rate *9cc43c3f7 - John Nash, 2019-12-02 : determine calculated stake based on posv version *7baa3bf75 - John Nash, 2019-11-25 : check the posv transaction for correct pubkey *9ffa7ca38 - John Nash, 2019-11-21 : check for posv v1 or posv v2 blocks when calculating stake reward *39f7aad68 - John Nash, 2019-11-14 : add logging *0e283e6c3 - John Nash, 2019-11-13 : correct maths *74cbdeffd - John Nash, 2019-11-11 : use new posv v2 functions addidtional logging *35d7413b5 - John Nash, 2019-11-11 : add new proofofstakereward *3d917216c - John Nash, 2019-11-11 : get inflation adjustment *f63d17443 - John Nash, 2019-11-08 : add the developer output split fund output *ca263c9c9 - John Nash, 2019-11-05 : add dev key to chainparams *df6996ab0 - John Nash, 2019-11-05 : add block version checking *14b663479 - John Nash, 2019-11-05 : increase block version
Thanks to everyone who contributed to coding, testing and feedback for this release, notably:
@cryptognasher @techadept @chris @cryptobuze @harmonyq @mindredder @paxtech @Tiago Peralta 
Stake on!!
-Reddcoin (RDD) Core Development Team
submitted by TechAdept to reddCoin [link] [comments]

Groestlcoin 6th Anniversary Release


Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.

Other Linux


Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here


ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.





ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.



Main Release (Main Net)
Testnet Release


ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.


Live Version (Not Recommended)



ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).





ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).




Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.


Remastered Improvements



ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.



Linux :
 pip3 install -r requirements.txt python3 bip39\ 


ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.



Linux / OSX (Instructions)


UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.



Main Net
Main Net (FDroid)
Test Net


UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.




UPDATED – P2Pool Test Net



Pre-Hosted Testnet P2Pool is available via


submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

BTC Node. Need help with Ubuntu and BTC core program. To the Linux experts here in reddit.

The good thing of loosing a post, is that you have to retype everything and this means that you are able to shorten the post.
So. TLDR, I have 2 hdd, 80gb and 320, the second one has only, all the Blockchain info, from another already running node. I am not able to tell BTC Core program that the files are already there so he does not need to download 300gb. After hours of Google and linux forums, I am stuck in this issue. Every time I type "bitcoin-qt" on my terminal, it shows as a first download. Any help will be appreciate.

Full story.
English is not my first language, and this is being typed for second time (please have mercy on my grammar or misspelling mistakes), because I posted the question on linux subreddit nobody give a f..... so I decided to bring it here, posted a short post with the link and the automatic bot deleted because the of the link. I erased both the linux and the bitcoin post, and made a third one new, here, with plain text, copy pasting the info from the linux post. Never appeared on the "new" section of this sub. So hours of typing lost, and here we are.
Old Notebook. 80gb drive, and noob to Linux. Although I have some pc and logic knowledge, installed MINT due to a recommendation from a Bitcoin community, but since I have a friend with an already running node, with Ubuntu switched to this one, just to have the same system.
Once Ubuntu installed, on the 80gb and pc running, I copy and pasted the whole bitcoin folder from my friends pc to my 320 gb. Up to here all was good. But here is the problem

My friend, who does not understand nothing about linux, is owner of a company and has an IT guy who made everything for him, but would not be willing to help me a lot, (just to be good with his boss but right now it is not reachable for me), but when we where on my pc he told me that Linux is very sensitive to ports, in other words, a small usb change, will do a program to loose the path for the files. SO, instead of using the 320gb disk on USB i installed on this notebook second Hdd bay (its an old high end laptop with 2 sata connectors), he was able to set the program and everything went well for a couple of hours, Bitcoin Core program started synchronizing, downloading very little info.

I needed to turn of the pc to move it, so closed the program (waited until bitcoin core program told me was safe to) and turn it off, then turn it on again, and the problem was there, bitcoin core program started trying to download the whole blockchain in the spare 2gb of the 320 gb disk.
So what it seemed to happen is that even when the disk is installed on a sata bay from the motherboard, as I did not installed ubunutu with this disk connected it's route (adress?) is dinamyc and that is why BTC Core Program lost the files and does not recognize it.
After hours of google, linux forums and "askubuntu" i was able to, mount the 320gb disk, first editing the fstab ( i followed the guide in "") by the way. Trying to use VIM editor was a pain, it is REALLY difficult to type something there, and save it without pressing a wrong key. I had to cancel and start over at least a dozen times (plus reading several guides), but still was not able to mount the disk (Actually after following the steps, the hdd (320) disappeared from the GUI). went back, erased, and the did the NANO steps, and I THINK that now the hard drive it is fixed (before, any change,when restarting the second hdd took some time to appear, now it seems that is mounted and to a fixed adress). Well, after mounting the hdd, I tryed to call the bitcoin-qt and the initial download page appear and again tries to download from the initial block. I searched over hours "file association in ubuntu", "program files path" etc etc and the only thing I found is how to set up the desired software to open a file.

For you to understand my mess, when I did the "user:user" thing, I did not understand completely what I was doing, (yes I had to be in sudo) BUT i think I managed to did the correct thing as both hdd are shown in the Ubuntu GUI.

Some additional data is
Both hard drives are formated in Ext4
I have (I think that) a fstab.bak before any changes

I knwo that linux users sometimes ask for details on the system, just tell me the commands and i can run them to stick any info needed.

Thanks for the help in advance.
submitted by Cabe72000 to Bitcoin [link] [comments]

I have a txindex question.

I set txindex=1 in the bitcoin.conf file and restarted Bitcoin-QT. I see it reindexing but it's taking days instead of hours to finish.
Meanwhile, I have to start up Bisq to finalize a trade before the trade times out. However, Bisq always connects to a local full node if it detects one and Bisq warns never to start it if your full node is not up to date yet.
So, here's my question. Can I shutdown Bitcoin-QT while it's still reindexing its local copy of the blockchain without consequences? Or, if I interrupt it before completion, am I corrupting my downloaded copy of the blockchain and I'll have to start over the full node setup?
submitted by cooriah to Bitcoin [link] [comments]

Issue upgrading my bitcoin node

I'm trying to update my current node (v0.18.1.0). I'm running my node on Mac using an external HD.
Everything is on my HD except for the bitcoin.conf file and the Bitcoin Core icon in my Applications folder.
I was able to launch my node using the icon on my Application folder (bitcoin-qt) or using the command line (bitcoind)
Since I downloaded the new version (v0.19.0.1), I have the following issue:
When I launch my node using the icon on my Application folder (bitcoin-qt) everything is fine and the new version is running (using the data in my external HD), but when launch the node using the command line (bitcoind), it still launch the old version.
Is there a separate update from bitcoind? I've done some research online but I didn't find anything helpful.
Thank You!!!
I have downloaded "bitcoin-" which include the executable for bitcoind, bitcoin-cli, etc and replace the old ones by the new ones and everything looks fine!
submitted by germmmmmm to Bitcoin [link] [comments]

What are your censorship stories that bitcoin would fix

I saw another post that I thought was asking for censorship stories, but it was just a different type of complaint, so I thought to make this post.
So... What are some stories you'd be willing to share that woke you up to how much centralized censorship there is today, and why bitcoin might help.
I'll start:
2015, I wanted to check out bitcoin so I got some from a faucet and downloaded bitcoin-core and the blockchain. Few days later I got a letter from Comcast (my ISP) saying that they recognized suspicious traffic on my MAC and suggested I call support to have a tech come out and run a virus scan. I ignored it, but it prompted me to log into my ISP account, which I never do. Sure enough I had a stack of emails from Comcast to my ISP email address saying the same thing. Turns out they were routinely doing port scans on my network looking for open ports. When I opened my NAT firewall for bitcoin-qt they saw this as "suspicious traffic".
Not really "censorship" but definitely creepy.
2016, getting kinda freaked out by the previous, I decide to run my client over TOR. This was on a linux box so I no longer had the blockchain. So I set it up and start pulling down blocks and I'm now satisfied that my node is reachable without having to punch a hole through my NAT or get nasty letters from Comcast. Then all of the sudden my connection drops. Assuming it's just crappy internet I don't think about it for the rest of the week. Weekend comes and I have some free time so I fire up my linux box and my tor node then boom.... my connection drops. Turns out every time I fired up my tor node they would "re-provision" my cable modem. Filed a shit-ton of issues, letters and social media posts.
End result was that the directed me to their terms-of-service which explicitly prohibit the use of "peer-to-peer" software or running any internet "servers" on their service.
2018, My previous encounters got me interested in Tor, I2P, and other types of networks. I wrote a series of posts about it. Since all my spare money goes into DCA I decided to go with a free dynamic-dns service for a static hostname. Eventually, since tons of scammers use the same free dynamic-dns service, both reddit and facebook have a site-ban on any URL linking to it. Luckily my gh-pages link does a 301 redirect so I can link to it indirectly here: . For fun try pasting the URL it redirects to in a reply post and you will find the site automod kick in and remove it. Won't affect your user account though.
submitted by brianddk to Bitcoin [link] [comments]

[IDEA] [PROPOSAL] Monero Debian (deb) packages / Debian package repository (I can do)

I have the skills to implement this if wanted.
Possible User Experience
This is a proposal, i.e. not implemented yet. Instructions for users, simplified.
How to install monero using apt-get
Download the repository signing key.
Add the signing key.
sudo apt-key --keyring /etc/apt/trusted.gpg.d/monero.gpg add ~/monero.asc
Add APT repository.
echo "deb buster main" | sudo tee /etc/apt/sources.list.d/monero.list
Update your package lists.
sudo apt-get update
Install monero.
sudo apt-get install monero
A few technical implementation details
I would simply grab the binaries provided by, download them, check software (gpg) signatures, put these into deb packages, add these to a repository, and upload the repository.
What I would not do is creating the binaries during package creation. While this is nice to have, it doesn't help user experience and blocks the progress on reaching this goal. See next chapter.
Why simply put the pre-build Monero binaries into a deb package?
1) After bitcoin existing for more than 10 years, being popular and being in Debian unstable (sid) it still never made its way into Debian testing, let alone stable. Reason being explained that a difference in underlying libraries (even just security fixes) during compilation may result in a network split. Binaries compiled during packaging on different versions of Linux distributions might have different libraries that might cause a network fork / chain split.
(Note: above website saying Tags: fixed-upstream is probably a mistake as discussion at bottom says.)
2) The github issue of packaging monero stalled.
3) By shipping the same binaries as provided by reduces the chances of introducing a backdoor.
Many Options
Doable quickly. The electrum (bitcoin) AppImage was recently added to a Debian package (binaries-freedom) by me and is now easily installable in Whonix. Pre-installed in testers version of Whonix already.
About Me
I am the founder of Whonix, which I am maintaining at present for more than 7 years.
Whonix (formerly TorBOX) is a Debian GNU/Linux–based security-focused Linux distribution. It aims to provide privacy, security and anonymity on the internet.
You can see an overview of packages I am maintaining on my github profile.
To proof that this forum account adrelanos corresponds the same person maintaining, it is added here.
What happened to, what is the successor of the forum funding system?
submitted by adrelanos to Monero [link] [comments]

Help setting up Bitcoin Core node with Tor hidden service

I am trying to run a full node with Bitcoin Core and get it running as a Tor hidden service but the steps I am following are from many sources and I feel like I have been missing steps in between, not to mention that my technical skills are fairly basic.
Here's where I'm at (Windows):
Can someone please tell me if I've missed something or if I've done it right then how to check that I have?
Update: Currently I have a "work-around" by running tails in a VM and running bitcoin-qt inside that. Because it's a livecd if it gets shutdown for any reason I'd have to set it up each time so I would still like to get the full node running with Tor on Windows.
I am using bitcoin-qt.exe from the Windows installation of Bitcoin Core and using any combination of the network settings to get it to use Tor and it does connect to onion addresses, sometimes one or two and the remaining of the eight are normal nodes.
I can't figure out how to make Bitcoin Core only connect Tor nodes instead of none or a mixture.
Update 2: Instead of using the Tails in a VM workaround, I have the windows Bitcoin Core Node running properly over Tor now. I still have to wait a few days at least to see if I can get more than two incoming connections.
I read in many places that port 8333 had to be opened in order to receive incoming connections but I have been assured that doesn't apply to onion nodes and that checking getnetworkinfo with bitcoin-qt console shows onion as reachable is proof.
There was also an issue with Tor not working with the CookieAuth when that set was added to torrc. Simply CookieAuthFile needed to be added.
I'm adding these notes in case any other windows user has trouble getting their node running with Tor.
SYD4uo was a huge help and I appreciate those others that took the time to give advice. Cheers!
This was also very helpful
submitted by Slayer3608 to Bitcoin [link] [comments]

OPERATION ICARUS IS LIVE! Event Details & Megathread! 1st July - 14th July

OPERATION ICARUS IS LIVE! Event Details & Megathread! 1st July - 14th July
Hackers, it's time.
Operation Icarus, our simulated Red Team event, is now live. Sign up now, and learn more about passive reconnaissance and target information gathering, whilst getting ready to attack a fictional company, Philman Security Inc! Events will occur at random times during the two-week event, and more information will be required within the Intelligence Report. Information you find now will help you in the future phases of this Operation. When you're ready to start, sign up using the Google Forms link below, join our Discord server, then read the Assignment Brief and start hunting!

This post contains the following content:
  1. Assignment Brief
  2. Event Rules
  3. Useful Links + How to Submit Info
  4. New Content, Tips, Hints, and Learning Material (Every 3 days!)
  5. FAQs
  6. Special Thanks + Event Staff Recruitment
  7. What Happens Next? + Rewards

1) Assignment Brief
PhilmanSecurityInc is a cyber security company, and our target. One service they offer are penetration tests against client companies, and therefore they hold a number of high-value reports, containing vulnerabilities and security flaws which could be used to launch future attacks. We need these. A former employee has informed us that their infrastructure is poorly-managed, and that proper access controls aren't enforced, potentially allowing access to the reports. Now's our chance. Unfortunately for us, the ex-employee's credentials have been revoked, so we're not able to jump straight into their private network. We'll need to start from the ground up. First, we need to gather as much information as we can on the company and its' partners. This includes employees, services, email accounts, any potential credentials, and anything else that could we valuable in the later stages of our attack. Keep track of Philman Security Inc's social-media over the next two weeks, they might post information that's valuable to us. Follow this link to a document where you can record your findings, for later use (download it to your local machine FILE -> Download As or FILE -> Make a Copy). Fill this out as much as you can, we'll need this information soon. ***** We've identified a public-facing email account that may be in use. Send a recon email to [email protected] and see what information gets sent back to you. Good luck. 

1) DO NOT attack ANY identified systems or services in ANY form (web-based attacks; XSS, SQLi, BruteForce, OR any form of network scanning). This phase does NOT include any SRT-owned infrastructure. You will be hacking real companies, which is ILLEGAL. We will clearly state when you are permitted to launch attacks or scans (in future phases). THIS IS JUST INFORMATION GATHERING VIA OPEN-SOURCE INTELLIGENCE (OSINT) METHODS unless explicitly stated otherwise.
2) DO NOT post any information in the sub (posts or comments). This spoils it for other people. If you want to discuss what you've found, please use private methods such as direct messages, or other platforms (don't use our Subreddit chat or Discord either). Anyone found to be spoiling the event will be banned from the subreddit immediately. You may disclose information and methods in the Post-Op discussion megathread.
3) DO NOT attempt to log in or recover any email addresses found (including social-media accounts). This is not in scope of the event, and risks getting the accounts taken down, ruining the event for others.

Subscribe to our Subreddit - SecurityRedTeam
Register For The Event Here - Google Forms
Help Guide #1 (1st July) - Google Docs
Join The Live Discussion And Get Support - Discord
Submit Information To Earn Points - Slack
View The Leaderboard! - Website

New content will be added to the Intelligence Report every 3 days, so look out for updates! This provides everyone with more chances to earn points, and spot information that's hiding out there.
We will also be posting hints, useful information, and short training-style articles every 3 days, after all, this is a training exercise, and we want everyone involved to learn something new!
REMEMBER, new content will be added continuously over the 2 week period. Re-checking sites and sources multiple times throughout the event may reveal additional results!
July 1st - Opening Hints - What is Information Gathering and OSINT? (X) Read our article here: July 4th - COMING SOON July 8th - COMING SOON July 12th - COMING SOON 

5) FAQs
This section will address any major frequently asked questions. Please check here first before posting for support! We'll continuously add new content here, throughout the event.
Alternatively, if you need support, reach me on Discord using @Known_Divide!

6) Special Thanks + Event Staff Recruitment
I wanted to say a special thanks to u/LivingBillNye who very kindly donated Bitcoin, helping to cover some costs that this event required. I really appreciate it, and it went a long way.
On a side note, we're looking to recruit some staff that help us create events. We need both technical individuals, to help create and maintain virtual infrastructure, and non-technical members to help write a story/background information for our events to make them more immersive, digital graphics artists, and more. If you're interested in joining our Events Team, please send a Mod Mail, and we'll send you the recruitment form. This'll look great on your CV / in job interviews!

7) What Happens Next? + Rewards
This event ends on the 14th of July, and there will be a Post-Event discussion megathread, where everyone can unwind, share their experiences, make suggestions, and help us shape our future events. At some point in the near future, we will host Operation Icarus Phase 2 - Reconnaissance + Vulnerability Assessment. This phase will involve SRT-owned virtual infrastructure, that can be interacted with. In this part of the Operation, we'll teach you how to get hands-on with real-world tools, so you can develop technically, and methodically. Stay tuned for more information!
Rewards will be offered out to Teams and Individuals. More information will be announced soon!

Please note, this is our first attempt at an online event, and was all completed by 1 individual. Further events will become much more detailed and immersive, not only in terms of content, but also story and educational aspects. We appreciate your patience with any issues, and any feedback will be extremely valuable.
submitted by Known_Divide to SecurityRedTeam [link] [comments]

Reddcoin on Raspberry Pi

A lot of user asked lately, how to run Reddcoin on the popular Raspberry Pi platform. Raspberry Pi is a cheap ARM computer (using junk leftover chips with 10 year lag in technology) but it has enough RAM and consumes around 5 watts, so its ideal to use it for Reddcoin Staking.
This tutorial is not from me, i take NO RESPONSIBILITY about these binaries or the accuracy. This tutorial is created by cryptoBUZE, a fellow member of the Reddcoin community.
Before attempting to follow this tutorial, do a sudo apt-get update
The following commands must be run to install dependencies:
sudo apt-get install libboost-thread-dev
sudo apt-get install libboost-program-options-dev
sudo apt-get install libboost-filesystem-dev
sudo apt-get install libboost-system-dev
Download and install older libssl version - bitcoin clones are using this glorious and fantastic communist product of openssl so it naturally does not works. Its getting totally incompatible after each relase even with itself. Therefore, you must install this, which is the compatible one with the wallet software (no, you cant even compile the code with the newer one) :
sudo dpkg -i libssl1.0.0_1.0.1t-1+deb8u6_armhf.deb
sudo dpkg -i libssl-dev_1.0.1t-1+deb8u6_armhf.deb
Download the wallet software itself:
chmod +x reddcoin\*
When speaking about compatibility, ARM is similar to x86 if you are running user mode applications. You know that every arm based chip needs a different kernel due to the lack of an unified IO system thankfully for the glorious clueless egoistic communist developers at ARM, who succesfully bankrupted the corporation after 25 or so years, and the company got acquired by the japanese softbank. But in user mode, its sort of backward compatible if you have all the proper libraries installed. This means that this will run on any other newer ARM based machine as well (not just raspberry pi-s, on every other arm stuff, chromebooks, or android phones hacked to work with linux).
submitted by GeriGeriGeri to reddCoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B


This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
The updates
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.





This video shows how long it takes to start Reddcoin Core.   TL;DR:


Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  


Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

BITCOIN GENERATOR FREE BITCOIN MINER 2020 100% LEGIT BITCOIN MONEY ADD Installing Bitcoin-QT Programming Bitcoin-qt using the RPC api (1 of 6) Bitcoin Tutorial - download bitcoin core How to Use Bitcoin With Tor

Bitcoin-Qt is the original "softwareportemonnee" (in English: wallet) with which payments can be carried out, received, and stored and with which the peer-to-peer network of bitcoin is maintained. Bitcoin Qt is a free tool which allows not only bitcoins sent and received, but which the worldwide bitcoin system is maintained. Bitcoin Core is a community-driven free software project, released under the MIT license. Verify release signatures Download torrent Source code Show version history Bitcoin Core Release Signing Keys v0.8.6 - v0.9.3 - 0.10.2 v0.11.0+ Bitcoin-Qt is the so – called" official " client of the network, which is developed and promoted by Bitcoin Foundation, a non-profit organization uniting core developers and responsible for the community's contacts with corporations and governments.Bitcoin Foundation branches are opened in several dozens of countries around the world. bitcoin qt free download. Qt Bitcoin Trader Supported Exchanges: HitBTC, Bittrex, Binance, Bitfinex, BTC-e, Bitstamp, GOC io, Indacoin, YoBit ne Linux: clicking on bitcoin: links was broken if you were using a Gnome-based desktop. Fix a hang-at-shutdown bug that only affects users that compile their own version of Bitcoin against Boost versions 1.50-1.52. Other changes

[index] [6147] [17096] [27277] [8842] [9124] [22477] [23846] [10511] [11094] [3946]


Bitcoin Tutorial - download bitcoin core Take time to educate yourself Bitcoin is different from what you know and use every day. ... Bitcoin-QT wallet review - Duration: 8:53. Secure Your Wallet ... In this video from we do a full review of the original Satoshi Bitcoin wallet. We do an install, look at the blockchain data,... Programming Bitcoin-qt using the RPC api (1 of 6) - Duration: 3:17. Lars Holdgaard 4,643 views. 3:17. Language: English Location: United States Restricted Mode: Off History Help BITCOIN HAS TRIGGERED TWO OF THREE BULL MARKET SIGNALS! - HUGE MOVE INCOMING ON BITCOIN?? - Duration: 18:06. Crypto Jebb 15,700 views. New; 18:06. BITCOIN & ALTCOINS WILL GO 100X! Here is why... Bitcoin-QT is a Bitcoin wallet and does some other functions. Running this software is the backbone to the entire Bitcoin system. You may need to open port 8333 in your firewall.

Flag Counter